The R1511P Embedded 4G/LTE Router is a cost-effective small footprint board. It offers Ethernet WAN, Wifi WAN and 4G WAN interfaces. These can all be independently configured in our powerful onboard Operating System – RobustOS.
The R1511P is a fully featured embedded 4G router targeted at applications such as EV Charging, traffic signs, vending machines, medical instrumentation, industrial instrumentation and many more IoT-type applications. An embedded router solves two problems that traditional routers do not – cost and size.
The R1511P is a cost-effective small footprint board with Ethernet WAN, Wi-Fi WAN and 4G WAN interfaces that can all be independently configured in the powerful onboard Operating System – RobustOS.
RobustOS is Robustel’s brilliant Linux based router operating system that offers functionality that could take a software engineer many months to write and even more months to adequately test. Key features of RobustOS include:
RobustVPN – innovative use of Open VPN tunneling to provide a fixed IP address on the router anywhere
RCMS – Robustel’s Cloud management platform – essential for managing an estate of routers – can be OEM branded
Data Guard – critical ‘failsafe’ that stops unexpected data overusage within seconds of a threshold being breached
Smart Reboot – essential recovery solution for when your roaming SIM card doesn’t roam!
SMS Control – total control of the router using SMS for general status or fixing fault conditions with IP Comms
Automated failover – configure the router to automatically fail from WAN/Wifi to 4G with just a few clicks
Cellular Interface | |
Number of antennas | 2 external antenna(MAIN + AUX) |
Connector | SMA-K |
SIM | 1* (3 V & 1.8 V) Standard SIM or eSIM |
Ethernet Interface | |
Number of ports | 2 x 10/100 Mbps, 2 x LAN or 1 x LAN + 1 x WAN |
Magnet isolation protection | 1.5 KV |
WiFi Interface | |
Number of antennas | 1 external antenna |
Connector | RP-SMA-K (external antenna) |
Standards | 802.11b/g/n, supports AP and Client modes |
Frequency bands | 2.4 GHz |
Security | WEP, WPA, WPA2 |
Encryption | 64/128 AES, TKIP |
Data speed | 2*2 MIMO, 300 Mbps |
RF output power
(+/-1 dBm)
|
802.11b 19 dBm |
802.11g 19 dBm | |
802.11n (20 MHz) 18 dBm | |
802.11n (40 MHz) 17 dBm | |
Receiving sensitivity
(+/-1 dBm)
|
802.11b -93 dBm |
802.11g -90 dBm | |
802.11n (20 MHz) -88 dBm | |
802.11n (40 MHz) -85 dBm | |
Serial Interface | |
Type | 1 x RS-232 or 1 x RS-485 (Hardware configuration) |
Connector | 3-pin 3.5 mm female socket |
Baud rate | 300bps to 115200bps |
Others | ||
Reset button | 1 x RST | |
LED indicators
|
1 x RUN, 1 x MDM, 1 x USR, 1 x RSSI, 1 x WLAN | |
Built-in | Watchdog, Timer | |
Software (Basic features of RobustOS) | ||
Network protocols
|
PPPoE, DHCP , NAT, DNS, SSH2, DDNS, etc. | |
VPN tunnel | IPsec, OpenVPN, GRE | |
Firewall | DMZ, anti-DDoS, Filtering (IP/Domain name/MAC address), Port Mapping, Access Control | |
Management | Web, CLI, SMS | |
SDK | ||
Supported programming languages | C, C++, Linux Shell scripts | |
Flash available for SDK | 4MB | |
RAM available for SDK | 64MB | |
App Center (Available Apps for RobustOS) | ||
Apps* | L2TP, PPTP, DMVPN, VRRP, QoS, Captive Portal, | |
WLAN Multi AP, SNMP, Language, RCMS | ||
*Request on demand. For more Apps please visit www.robustel.com. | ||
Power Supply and Consumption | ||
Connector | 2-pin 3.5 mm female socket | |
Input voltage | 9 to 36V DC | |
Power consumption | Idle: 100 mA@12 V
Data link: 500 mA (peak) @12 V |
|
Physical Characteristics | ||
Weight | 65 g | |
Installations | Three screw holes are fixed
ST2*8 black cross grooved pan head tapping screws |
|
Operating Temperature | -25 to +70 °C | |
Storage Temperature | -40 to +85 °C | |
Relative Humidity | 5 to 95% RH | |
Approvals | ||
EMI | EN 55032: 2012/AC: 2013 (CE & RE) Class B | |
EMS | IEC 61000-4-2 (ESD) Contact Level 2;
IEC 61000-4-3 (RS) Level 2 IEC 61000-4-4 (EFT) Level 2 IEC 61000-4-5 (Surge) Level 2 IEC 61000-4-6 (CS) Level 2 |
|
*See ordering information for details about other certifications |
R1511P User Guide V1.0.2
RobustOS Software Manual
*All Robustel Firmware and RobustOS Apps are now available to download from the App Centre section of RCMS Cloud.
If you don’t already have access to RCMS Cloud you can Sign Up freely.
*Please contact our Technical Support if you have any trouble finding the resources.
Model | PN | Serial Interface | LTE Category | Frequency Bands* | Region/Country | Certification |
R1511P-4L-A02EU-A | B061713 | RS232 | CAT4 | 4G: LTE FDD: B1/B3/B7/B8/B20/B28A
3G: WCDMA: B1/B8 2G: GSM: B3/B8 |
EMEA | CE, UKCA |
R1511P-4L-A02EU-B | B061714 | RS485 | ||||
R1511P-4L-A03AU-A | B061717 | RS232 | CAT4 | 4G: LTE FDD: B1/B2/B3/B4/B5/B7/B8/B28
LTE TDD: B40 3G: WCDMA: B1/B2/B5/B8 2G: GSM: B2/B3/B5/B8 |
Oceania | RCM |
R1511P-4L-A03AU-B | B061718 | RS485 | ||||
R1511P-4L-A05NA-A | B061731 | RS232 | CAT4 | 4G: LTE FDD: B2/B4/B5/B12/B13/B14/B66/B71 3G: WCDMA: B2/B4/B5 |
North America | FCC |
R1511P-4L-A05NA-B | B061732 | RS485 |
* Please note that the different LTE frequency bands are model dependent and not all 4G frequencies are currently supported on a single model of 1511P router.
* For more information about frequency bands in different countries, please contact your Robustel sales representative.