R3010 Industrial Gateway

Industrial Cellular IoT Gateway.
Designed for elevator monitoring and provides fast, reliable and stable Internet connectivity.

  • Key Features
  • Specification
  • Downloads
  • Model

R3010 is an industrial gateway designed for elevator monitoring and provides fast, reliable and stable Internet connectivity.

 

Key Features

  • 2G/3G/4G cellular network Support
  • Support always online and connect according to needs
  • Various interfaces: RS232/CAN/RS485/Console/USB/Ethernet/FXS
  • RS485 serial port supports BACnet protocol
  • Support voice communication
  • Support IPSec, OpenVPN, PPTP, L2TP, GRE, DMVPN
  • Support Modbus RTU/ASCII converts to TCP
  • Built-in real time clock, software watchdog
  • Support message, telephone and reboot at regular time
  • Support e-mail and message event alert
  • RobustOS + SDK + App
  • Equipped with third party management platform, to realize real-time processing and analysis, fault real-time warning
  • Management via SMS/Web/CLI/SNMP/RobustLink Cloud
  • Robust industrial design (9 to 26V DC, desktop, wall or DIN rail mounting)

 

Cellular Interface
Number of Antenna 2 (MAIN + AUX)
Type of Ports SMA-K
SIM slot Number 1 Mini SIM (2FF)
Standards GSM/GPRS/EDGE/WCDMA/HSDPA/HSUPA/HSPA+/DC-HSPA+/TD-SCDMA/CDMA (CDMA 1X/EVDO)/FDD LTE/TDD LTE

 

Voice Interface
Physical connector 3-pin 3.81 mm connector
Type 1 x FXS
Interface standard ITU Q.512 (SLIC), ITU K.20
(overcurrent and overvoltage protection)
Subscriber line interface circuit (SLIC) Ring voltage: 40 ~ 90 Vpk configurable

Ring frequency: 20 ~ 25 Hz

Ring waveform: sinusoidal

Maximum ringer load: 5 ringer equivalence numbers (RENs)

On-hook voltage (tip/ring): -46 ~ -56 V

Off-hook current : 18 ~ 20 mA

Terminating impedance: configurable

 

Ethernet Interface
Number of ports 2 x 10/100 Mbps (ETH0 + ETH1)

 

Serial Interface
Number of ports 1 x RS232 + 1 x RS485 + 1 x CAN
Connector 3-pin 3.81 mm connector
Signal definition RS232: Tx, Rx, GND

RS485: A (Data+), B (Data-), GND

CAN: H, L, GND

 

Others
Expansion 1 x USB 2.0 host, up to 480 Mbps
Console 1 x Console (GND, Tx, Rx)
LED Indicators 1 x RUN, 1 x MODEM, 1 x USR, 3 x RSSI, 1 x PWR

 

Software(Basic features of RobustOS)
Network protocols PPP、PPPoE、TCP、UDP、DHCP、ICMP、NAT、HTTP、HTTPs、DNS、ARP、RIP、OSPF、NTP、SMTP、Telnet、VLAN、SSH2、IP Pass-through, etc.
VPN tunnel IPsec, OpenVPN, GRE
Firewall DMZ, anti-DoS, Filtering (IP/Domain name/MAC address), Port Mapping, Access Control
Management Web, CLI, SMS
Serial port Transparent, TCP Client/Server, UDP,
Modbus RTU Gateway, BACnet

 

App center(Apps of RobustOS)
Apps L2TP, PPTP, DMVPN, DDNS, RCMS, VRRP, QoS, SNMP, Language
*Request on demand, for more Apps please visit www.robustel.com.

 

SDK
Supported programming language C, C++
Flash available for SDK 64 MB
RAM available for SDK 64 MB

 

Power Supply and Consumption
Power supply interface 2-pin 3.81mm connector
Input voltage 9 to 26 VDC
Power consumption 900 mA (MAX) @ 9 V, 600 mA (MAX) @ 12 V, 400 mA (MAX) @ 26 V

 

Physical Characteristics
Industry Protection Level IP30
Housing Metal, 300g
Dimensions 134mm x 98mm x 32mm
Installation Desktop, wall and DIN rail mounting
Operation Temperature -40~75°C
Storing Temperature -40~85°C
Humidity 5~95%RH
Regulatory and Type Approvals
Environmental RoHS2.0, WEEE
Model PN Frequency Bands* Country/Region Certification

(*In progress)

R3010-4L B040702 4G: LTE FDD: B2/B4/B5/B13/B17

3G: UMTS: B2/B5

North America FCC, IC, PTCRB, AT&T
B040703 4G: LTE FDD: B1/B3/B5/B7/B8/B20

LTE TDD: B38/B40/B41

3G: WCDMA: B1/B5/B8

2G: GSM: B3/B8

EMEA CE
B040705 4G: LTE FDD: B1/B3/B8/B18/B19/B26

LTE TDD: B41

3G: WCDMA: B1/B6/B8/B19

Oceania RCM*

* For more information about frequency bands in different countries, please contact your Robustel sales representative.

Product Inquiry
We will use this data to send you email communication about promotions, new products, service updates, important information, webinar invitations, customer services, sales related matters and important updates to keep you in the loop.

By clicking below to submit this form, you acknowledge that the information you provide will be processed in accordance with our Privacy Policy.