Industrial Cellular IoT Gateway.
Designed for elevator monitoring and provides fast, reliable and stable Internet connectivity.
R3010 is an industrial gateway designed for elevator monitoring and provides fast, reliable and stable Internet connectivity.
Key Features
| Cellular Interface | |
| Number of Antenna | 2 (MAIN + AUX) |
| Type of Ports | SMA-K |
| SIM slot Number | 1 Mini SIM (2FF) |
| Standards | GSM/GPRS/EDGE/WCDMA/HSDPA/HSUPA/HSPA+/DC-HSPA+/TD-SCDMA/CDMA (CDMA 1X/EVDO)/FDD LTE/TDD LTE |
| Voice Interface | |
| Physical connector | 3-pin 3.81 mm connector |
| Type | 1 x FXS |
| Interface standard | ITU Q.512 (SLIC), ITU K.20 |
| (overcurrent and overvoltage protection) | |
| Subscriber line interface circuit (SLIC) | Ring voltage: 40 ~ 90 Vpk configurable
Ring frequency: 20 ~ 25 Hz Ring waveform: sinusoidal Maximum ringer load: 5 ringer equivalence numbers (RENs) On-hook voltage (tip/ring): -46 ~ -56 V Off-hook current : 18 ~ 20 mA Terminating impedance: configurable |
| Ethernet Interface | |
| Number of ports | 2 x 10/100 Mbps (ETH0 + ETH1) |
| Serial Interface | |
| Number of ports | 1 x RS232 + 1 x RS485 + 1 x CAN |
| Connector | 3-pin 3.81 mm connector |
| Signal definition | RS232: Tx, Rx, GND
RS485: A (Data+), B (Data-), GND CAN: H, L, GND |
| Others | |
| Expansion | 1 x USB 2.0 host, up to 480 Mbps |
| Console | 1 x Console (GND, Tx, Rx) |
| LED Indicators | 1 x RUN, 1 x MODEM, 1 x USR, 3 x RSSI, 1 x PWR |
| Software(Basic features of RobustOS) | |
| Network protocols | PPP、PPPoE、TCP、UDP、DHCP、ICMP、NAT、HTTP、HTTPs、DNS、ARP、RIP、OSPF、SSH2、IP Pass-through, etc. |
| VPN tunnel | IPsec, OpenVPN, GRE |
| Firewall | DMZ, anti-DDoS, Filtering (IP/Domain name/MAC address), Port Mapping, Access Control |
| Management | Web, CLI, SMS |
| Serial port | Transparent, TCP Client/Server, UDP, Modbus RTU Gateway, BACnet |
| App center(Apps of RobustOS) | |
| Apps | L2TP, PPTP, DMVPN, DDNS, RCMS, VRRP, QoS, SNMP, Language |
| *Request on demand, for more Apps please visit www.robustel.com. | |
| SDK | |
| Supported programming language | C, C++ |
| Flash available for SDK | 64 MB |
| RAM available for SDK | 64 MB |
| Power Supply and Consumption | |
| Power supply interface | 2-pin 3.81mm connector |
| Input voltage | 9 to 26 VDC |
| Power consumption | 900 mA (MAX) @ 9 V, 600 mA (MAX) @ 12 V, 400 mA (MAX) @ 26 V |
| Physical Characteristics | |
| Industry Protection Level | IP30 |
| Housing | Metal, 300g |
| Dimensions | 134mm x 98mm x 32mm |
| Installation | Desktop, wall and DIN rail mounting |
| Operation Temperature | -40~75°C |
| Storing Temperature | -40~85°C |
| Humidity | 5~95%RH |
| Regulatory and Type Approvals | |
| Environmental | RoHS2.0, WEEE |
R3010 User Guide
R3010 Firmware V3.1.2
R3010 Firmware 5.1.0
RobustOS Software Manual
*All Robustel Firmware and RobustOS Apps are now available to download from the App Centre section of RCMS Cloud.
If you don’t already have access to RCMS Cloud you can Sign Up freely.
*Please contact our Technical Support if you have any trouble finding the resources.
| Model | PN | Frequency Bands* | Country/Region | Certification
(*In progress) |
| R3010-4L | B040702 | 4G: LTE FDD: B2/B4/B5/B13/B17
3G: UMTS: B2/B5 |
North America | FCC, IC, PTCRB, AT&T |
| B040703 | 4G: LTE FDD: B1/B3/B5/B7/B8/B20
LTE TDD: B38/B40/B41 3G: WCDMA: B1/B5/B8 2G: GSM: B3/B8 |
EMEA | CE | |
| B040705 | 4G: LTE FDD: B1/B3/B8/B18/B19/B26
LTE TDD: B41 3G: WCDMA: B1/B6/B8/B19 |
Oceania | RCM* |
* For more information about frequency bands in different countries, please contact your Robustel sales representative.