R2000 Enterprise VPN Router

Industrial Dual Module Cellular VPN Router with Voice.
Industrial grade, high performance, agile deployment, high security and easy management with RCMS, for branch offices and retail stores.

  • Key Features
  • Specification
  • Downloads
  • Model

R2000 Ent Industrial Dual Module Cellular VPN Router with Voice is an all-in-one dual 4G LTE router with voice for branch offices and retail stores. Industrial grade, high performance, agile deployment, high security and easy management with RobustLink. Cut your project cost and save your maintenance resource.

 

Key Features

  • Voice call/RS-232/RS-485 (choose one only) shared across an RJ-11 port
  • Voice call and data transmission being used simultaneously, depending upon your ISP network
  • Supports GSM and VoLTE(optional) for voice traffic
  • Embedded dual module supporting two SIM cards online simultaneously
  • The feature Link Manager supporting configuration of Cellular WAN, Ethernet WAN, WiFi link backup and ICMP detection
  • WAN port supporting PD feature – compatible with 802.3at.
  • RobustOS + SDK + App
  • IPsec/OpenVPN/GRE/L2TP/PPTP/DMVPN
  • Management and maintenance via Web/CLI/SMS
  • SNMP/RobustLink Cloud
  • Robust industrial design (9 to 36V DC, desktop or wall mounting or DIN rail mounting)

 

Cellular Interface
Number of ports 4 (MAIN1 + AUX1 + MAIN2 + AUX2)
Connector SMA-K
SIM 2 (3 V & 1.8 V)
Standards GSM/GPRS/EDGE/WCDMA/HSDPA/HSUPA/HSPA+/DC-HSPA+/TD-SCDMA/CDMA (CDMA 1X/EVDO)/FDD LTE/TDD LTE

 

Ethernet Interface
Number of ports 4 x LAN + 1 x WAN (10/100 Mbps)
WAN port Supports 802.3 at PD feature (optional)
Magnet isolation protection 4 KV

 

WLAN Interface
Number of ports 2 (WiFi1 + WiFi2)
Connector RP-SMA-K
Standards 802.11 b/g/n, supporting AP and Client mode
Frequency bands 2.412 – 2.484 GHz (2.4 GHz ISM band)
Security WEP, WPA, WPA2
Encryption 64/128 AES, TKIP
Data speed 2*2 MIMO, up to 300 Mbps
RF output power
(+/-1 dBm)
 802.11b 19 dBm, 802.11g 19 dBm
802.11n (20 MHz) 18 dBm
802.11n (40 MHz) 17 dBm
Receiving sensitivity
(+/-1 dBm)
 802.11b -93 dBm, 802.11g -90 dBm
802.11n (20 MHz) -88 dBm
802.11n (40 MHz) -85 dBm

 

Voice Interface
Number of ports 1 x Voice call(only SIM1 support)
Connector
RJ11 (also be used for landline telephone’s
power supply)
Standards ITU Q.512 (SLIC)
ITU K.20 (overcurrent and overvoltage protection)
Subscriber line interface circuit (SLIC) Ring voltage: 40 to 90 Vpk configurable
Ring frequency: 20 to 25 Hz
Ring waveform: sine wave
Maximum ringer load: 5 ringer equivalence numbers (RENs)
On-hook voltage (tip/ring): -46 to -56V
Off-hook current: 18 to 20 mA
Terminating impedance: configurable

 

Device Interface
Serial port 1 x RS-232/RS-485 with an RJ-11 interface
USB host 1 x USB 2.0 port up to 480 Mbps

 

Others
Reset button 1 x RST
LED indicators 1 x RUN, 1 x NET1, 1 x NET2, 1 x RSSI1, 1 x RSSI2,
  1 x USR
  5 x LINK of Ethernet interface, including ETH1,
  ETH2, ETH3, ETH4 and WAN

 

Software (Basic features of RobustOS)
Network protocols PPP, PPPoE, TCP, UDP, DHCP, ICMP, NAT, HTTP,
  HTTPs, DNS, ARP, RIP, OSPF, NTP, SMTP, Telnet,
  VLAN, SSH2, etc.
VPN tunnel IPsec, OpenVPN, GRE
Firewall DMZ, anti-DoS, Filtering (IP/Domain name/MAC address), Port Mapping, Access Control
Management Web, CLI, SMS
Serial port Transparent, TCP server/client, UDP,
Modbus RTU Gateway
App center(Apps of RobustOS)  
Apps* L2TP, PPTP, DMVPN, RobustVPN, DDNS, VRRP,
QoS, Captive Portal, WLAN Multi AP, SNMP,
  Language, RobustLink
*Request on demand. For more APPs please visit www.robustel.com.

 

Power Supply and Consumption
Connector 2.1 mm DC Jack socket
  Input voltage 9 to 36V DC
Power consumption Idle: 350 mA@12 V
  Data link: 500 mA (peak) @12 V
PD feature WAN port support
  Input voltage 48 to 57V DC
*It is not recommended to use DC power supply and PD power supply

 

Physical Characteristics
Ingress protection IP30
Housing & Weight Metal, 695 g
Dimensions 193 x 113 x 32 mm
Installations Desktop or wall mounting or 35 mm DIN rail mounting

 

Approvals  
Regulatory CE
Environmental RoHS 2.0, WEEE
R2000 Ent Datasheet

 

R2000 Ent Quick Guide (Installation and Configuration)

 

R2000 Ent User Guide

 

R2000 Series Firmware V3.0.19 (Latest)

 

 

Model

R2000-E4L1

R2000-E4L2

Module Number

Single module

Dual module

Antenna Number

2

4

Air Interface

GSM/GPRS/EDGE/WCDMA/HSDPA/HSUPA/HSPA+/DC-HSPA+/TD-SCDMA/CDMA (CDMA 1X/EVDO)/FDD LTE/TDD LTE

Frequency Bands

EMEA:B1/B3/B5/B7/B8/B20; B38/B40/B41

AU: B1/B2/B3/B4/B5/B7/B8/B28;B40

CN:B1/B3/B5/B8; B38/B39/B40/B41

4G*

3G

EMEA: B1/B5/B8

AU: B1/B2/B5/B8

CN: B1/B5/B8; B34/B39; BC0

2G

EMEA: B3/B8

AU: B2/B3/B5/B8

CN: B3/B8

Operating Temperature

-25 to +70 °C

Storage Temperature

-40 to +85 °C

Relative humidity

5 to 95% RH

*For more information about 4G frequency bands in different countries, please contact your Robustel sales representative.





Product Inquiry
First Name*
Last Name*
Country*
Company*
Title
Email*
Phone*
Product of Interest*
Your Message*
Lead Source
Know channel
We will use this data to send you email communication about promotions, new products, service updates, important information, webinar invitations, customer services, sales related matters and important updates to keep you in the loop.

By clicking below to submit this form, you acknowledge that the information you provide will be processed in accordance with our Privacy Policy.